COLE-TUVE, INC. - Sheet and Plate Bending Rolls - Power Rear Roll Adjustment
 
 
 
COLE-TUVE, Inc.
Phone: (410) 933-0700
Fax: (410) 933-0600
Toll Free: 1-877-989-0700

For our address, click here!

  Home > Our Machines > Bending/Rolls > Sheet and Plate Bending Rolls - Power Rear Roll Adjustment
   
 


SHEET AND PLATE BENDING ROLLS
WITH POWER REAR ROLL ADJUSTMENT

VERSATILE, LOW-COST NUMERICAL CONTROL (NC) OPTIONAL
 

Standard equipment on SRD Models includes power rear roll adjustment, cone bending attachment and roll shafts extended for optional bar/angle rolls.


SRD-3-140 3' x 1/4"
SRD-3-16 3' x 3/8"
SRD-3-200 3' x 1/2"
SRD-4-130 4' x 5/32"
SRD-4-160 4' x 1/4"
SRD-4-180 4' x 3/8"
SRD-4-200 4' x 1/2"
SRD-5-120 5' x 10 ga.
SRD-5-160 5' x 3/16"
SRD-5-170 5' x 1/4"
SRD-5-180 5' x 5/16"
SRD-5-200 5' x 3/8"
SRD-6-130 6' x 10 ga.
SRD-6-170 6' x 3/16"-1/4"
SRD-6-180 6' x 1/4"
SRD-6-200 6' x 5/16"
SRD-8-140 8' x 14 ga.
SRD-8-150 8' x 10 ga.
SRD-8-180 8' x 3/16"-1/4"
SRD-8-200 8' x 1/4"
SRD-10-150 10' x 16 ga.
SRD-10-180 10' x 14 ga.
SRD-10-200 10' x 10 ga (5/32")
SRD-12-160 12' x 14 ga.
SRD-12-200 12' x 10 ga.


AMERECON MODEL SRD Sheet and Plate Bending Rolls can be equipped with a new rear roll anti-deflection system which will provide the following advantages:
  • Prebending is easier and better.
  • Very thin materials can be effectively rolled.
  • Smaller diameters can be rolled.
  • Machine utilization can be increased.
  • In many cases, one machine will do instead of two.

Any of these can be your PROFITMAKER™

REALLY AFFORDABLE PRICES........ ALWAYS!

One or more of these machines may be on our Monthly Specials List.
Please click here to view.

Interested in this product?  Please click here to contact us!

Click here to return to our main product list.

 

   
 
 

Copyright © 2003-2007 COLE-TUVE, Inc.   All rights reserved.
Web Site design and Hosting by Hyper Media Corp.