| Model | Capacity (Mild Steel) |
Rolls Diameter |
Useful Length |
|---|---|---|---|
| 4R HMS 650 x 80 |
2' x 10 ga. | 3.15" | 25.59" |
| 4R HMS 1050 x 80 |
3' x 12 ga. | 3.15" | 41.34" |
| 4R HMS 1270 x 80 |
4' x 14 ga. | 3.15" | 50" |
| 4R HMS 1270 x 100 |
4' x 11 ga. | 3.94" | 50" |
| 4R HMS 1270 x 130 |
4' x 3/16" | 5.12" | 50" |
| 4R HMS 1270 x 150 |
4' x .275" | 5.91" | 50" |
| 4R HMS 1270 x 180 |
4' x 3/8" | 7.09" | 50" |
| 4R HMS 1270 x 200 |
4' x 1/2" | 7.87" | 50" |
| 4R HMS 1550 x 80 |
5' x 16 ga. | 3.15" | 61.02" |
| 4R HMS 1550 x 100 |
5' x 14 ga. | 3.94" | 61.02" |
| 4R HMS 1550 x 130 |
5' x 5/32" (.177") |
5.12" | 61.02" |
| 4R HMS 1550 x 150 |
5' x 1/4" | 5.91" | 61.02" |
| 4R HMS 1550 x 180 |
5' x 5/16" (.354") |
7.09" | 61.02" |
| 4R HMS 1550 x 200 |
5' x 7/16" | 7.87" | 61.02" |
| 4R HMS 1550 x 220 |
5' x 1/2" | 8.66" | 61.02" |
| 4R HMS 1550 x 250 |
5' x 9/16" | 9.84" | 61.02" |
| 4R HMS 2050 x 130 |
6' x 5/32" | 5.12" | 80.71" |
| 4R HMS 2050 x 150 |
6' x 1/4" | 5.91" | 80.71" |
| 4R HMS 2050 x 180 |
6' x 5/16" | 7.09" | 80.71" |
| 4R HMS 2050 x 200 |
6' x 3/8" | 7.87" | 80.71" |
| 4R HMS 2050 x 220 |
6' x 7/16" | 8.66" | 80.71" |
| 4R HMS 2050 x 250 |
6' x 1/2" | 9.84" | 80.71" |
| 4R HMS 2550 x 150 |
8' x 5/32" | 5.91" | 100.39" |
| 4R HMS 2550 x 180 |
8' x 1/4" | 7.09" | 100.39" |
| 4R HMS 2550 x 200 |
8' x 5/16" | 7.87" | 100.39" |
| 4R HMS 2550 x 220 |
8' x 5/16" (.354") |
8.66" | 100.39" |
| 4R HMS 2550 x 250 |
8' x 3/8" | 9.84" | 100.39" |
| 4R HMS 3100 x 180 |
10' x 5/32" | 7.09" | 122.05" |
| 4R HMS 3100 x 200 |
10' x 1/4" | 7.87" | 122.05" |
| 4R HMS 3100 x 220 |
10' x 5/16" | 8.66" | 122.05" |
| 4R HMS 3100 x 250 |
10' x 5/16" (.354") |
9.84" | 122.05" |
Other capacities available on request.
Many specifications can be modified on request; additional cost may apply. All data is approximate, and data and design are subject to correction or change without prior notice.
Hydraulic 4-Roll Plate Bending Rolls
![dot[1]](/wp-content/uploads/2015/09/dot1.png){kind=small}
SEE VIDEO STANDARD FEATURES
- Suitable for Light and Medium Plates Including Aluminum and Stainless Steel
- Cylinders can Easily be Rolled in Full Circle or Varying Radiuses
- Hydraulic Adjustment of the Lower Central and Side Rolls
- Linear Movement (Slide) of the Side Rolls
- Overload Protection
- Top Roll is Powered by Electrical Motor and Planetary Gearbox. Bottom Roll is Powered with Cardan Joint System (Two Rolls Powered)
- Three Digital Readouts for Easy Roll Positioning
- Hydraulic Drop-End for Easy Removal of Finished Cylinder
- Convenient Operation with Mobile Control Panel
- Welded Steel Frames
- Induction Hardened Forged or Rolled SAE 1050 (CK 45) Steel Rolls
- Cone Bending Device
- Hydraulic Balancing System
- Built According to EC Safety Directives (CE Mark)
