Model DKS presses are high power, hydraulic presses for straightening or bending plates and structurals with the unique feature of a multi-axis pressing unit. Each press is equipped with a mobile bridge, which moves over a sectioned bed. The bridge moves back and forth along the length of the bed, and on the bridge the vertically operated pressing unit moves from side to side. As such, there is wide coverage of the materials to be straightened or bent without moving them once they are placed on the bed.
All functions are push button controlled. A manually operated locking device keeps the bridge in the required positions. The presses are available in three capacities: 220, 330 and 440 tons. (The DKS 200 features a 220-ton capacity.)
Bed sizes, range of movement, and rates of movement are shown in the table below. The machines electrical and hydraulic components are from internationally recognized sources. The machines are CE certified for meeting stringent international standards of design, production and quality.
Technical Data | Units of Measurement | Capacities |
---|---|---|
Press Power | U.S Tons | 220 |
Maximum Pressure | PSI | 4100 |
Stroke | In. | 11.8 |
Piston Diameter | In. | 11.8 |
Ram Speeds - Advance -Press |
In/Min | 35.4 11.8 |
Bridge Travel | In. | 878.7 |
Main motor | HP | 20 |
Bridge Motors | Total HP | 1-1/2 |
Dimensions | L x W x H, In. | 118 x 158 x 118 |
Weight | Lbs. | 31130 |
Many specifications can be modified on request; additional cost may apply. All data is approximate, and data and design are subject to correction or change without prior notice.