Rolls Used | Shape | Capacity |
---|---|---|
ST | Angle Iron, Leg Out |
6" x 6" x 3/4" ∅158" |
ST* | Angle Iron, Leg In |
5-1/2" x 5-1/2" x 9/16" ∅197" |
ST | Flat Bar, Easy Way |
10-1/2" x 2" ∅59" |
ST | Flat Bar, Hard Way |
6" x 1-3/8" ∅99" |
ST | Square Bar |
3-1/2" ∅59" |
ST | T-Iron, Leg Out |
6" x 5/8" ∅79" |
ST | T-Iron, Leg In |
5" x 5/8" ∅99" |
ST** | Channel, Leg Out |
11" ∅79" |
ST** | Channel, Leg In |
11" ∅119" |
SP | Round Bar |
3-1/2" ∅71" |
SP | Tube Round |
7" x 5/32" ∅237" |
ST** | Tube Square |
5" x 1/4" ∅158" |
ST** | Tube Rectangular |
6" x 2" x 3/16" ∅178" |
ST | Pipe | 6" Sch. 40 ∅138" |
Shaft Diameter | 6.3" | |
Dia. of Rolls, Upper/Lower | 19.69" | |
Driven Rolls | 3 | |
Rolling Speed, FPM | 10 & 19-1/2 | |
Rolls Adjustment | Hydraulic | |
Working Plane | Horizontal/Vertical | |
Motor HP | 29 | |
Approx. Weight - lbs. | 23540 | |
Approx Overall Size | 99" x 93" x 103" |
Many specifications can be modified on request; additional cost may apply. All data is approximate, and data and design are subject to correction or change without prior notice.
Angle, Pipe & Shape Bending Rolls
Hydraulic, Double-Pinch Type
STANDARD FEATURES
- All Three Rolls Powered by Hydro-Motors and Planetary Gearboxes
- Rolls are Hardened
- Roll Shafts are Special Steel, Hardened and Ground
- Standard Rolls Handle Many Shapes
- 3-Axis Hydraulic Leg-In Guide Rolls
- Two Rolling Speeds
- Two-Electronic Digital Readouts (LED)
- Horizontal and Vertical Working Positions
- Mobile Control Console with Push Button Controls and Digital Readouts
OPTIONAL EQUIPMENT
- Pipe/Tube/Shape Bending Rolls
- Beam-On-Edge Bending Device
- NC Control