Rolls Used | Shape | Capacity |
---|---|---|
ST | Angle Iron, Leg Out |
2-3/8" x 2-3/8" x 1/4" ∅26" |
ST* | Angle Iron, Leg In |
2" x 2" x 3/16" ∅22" |
ST | Flat Bar, Easy Way |
3-1/8" x 3/4" ∅20" |
ST | Flat Bar, Hard Way |
2-3/8" x 3/8" ∅20" |
ST | Square Bar |
1-1/4" ∅16" |
ST | T-Iron, Leg Out |
2-3/8" x 1/4" ∅22" |
ST | T-Iron, Leg In |
2 x 1/4" ∅20" |
ST** | Channel, Leg Out |
3-1/8" ∅24" |
ST** | Channel, Leg In |
2-1/2" ∅24" |
SP | Round Bar |
1-3/8" ∅14" |
SP | Tube Round |
2-3/8" x 14 ga. ∅24" |
ST** | Tube Square |
1-3/4" x 1-3/4" x 11 ga. ∅24" |
ST** | Tube Rectangular |
2" x 1" x 11 ga. ∅18" |
ST | Pipe | 2" Sch. 40 ∅16" |
Shaft Dia. Upper/Lower | 2.38"/1.97" | |
Dia. of Rolls, Upper/Lower | 7.09" | |
Driven Rolls | 3 | |
Rolling Speed, FPM | 16-1/2 | |
Rolls Adjustment | Hydraulic | |
Working Plane | Horizontal/Vertical | |
Motor HP | 4 | |
Approx. Weight - lbs. | 2200 | |
Approx Overall Size | 48" x 34" x 48" |
Many specifications can be modified on request; additional cost may apply. All data is approximate, and data and design are subject to correction or change without prior notice.
Angle, Pipe & Shape Bending Rolls
Hydraulic, Double-Pinch Type
STANDARD FEATURES
- Three Rolls are Powered
- Rolls are Hardened
- Roll Shafts are Special Steel, Hardened and Ground
- Standard Rolls Handle Many Shapes
- 3-Axis Manual Leg-In Guide Rolls
- Two Electronic Digital Readouts (LED)
- Mobile Control Console with Push Button Controls and Digital Readouts
- Horizontal and Vertical Working Positions
OPTIONAL EQUIPMENT
- Pipe/Tube/Shape Bending Rolls
- Hydraulic 2-Axis Leg-in Guide Rolls
- NC Control