Rolls Used | Shape | Capacity |
---|---|---|
ST | Angle Iron, Leg Out |
9" x 9" x 3/4" ∅150" |
ST* | Angle Iron, Leg In |
9" x 9" x 3/4" ∅200" |
ST | Flat Bar, Easy Way |
18" x 3" ∅100" |
ST | Flat Bar, Hard Way |
9" x 3" ∅160" |
ST | Square Bar |
6" ∅100" |
ST | T-Iron, Leg Out |
8-5/8" x 7/8" ∅119" |
ST | T-Iron, Leg In |
8" x 1" ∅158" |
ST** | Channel, Leg Out |
19-5/8" ∅138" |
ST** | Channel, Leg In |
19-5/8" ∅160" |
SP | Round Bar |
7" ∅160" |
SP | Tube Round |
12-1/2" x 3/16" ∅200" |
ST** | Tube Square |
8-5/8" x 1/2" ∅240" |
ST** | Tube Rectangular |
14" x 6" x 3/8" ∅250" |
ST | Pipe | 10" Sch. 40 ∅200" |
Dia. of Rolls, Upper/Lower | 29.53" | |
Driven Rolls | 3 | |
Rolling Speed, FPM | 5 & 10 | |
Rolls Adjustment | Hydraulic | |
Working Plane | Horizontal | |
Motor HP | 75 | |
Approx. Weight - lbs. | 70400 | |
Approx Overall Size | 166" x 126" x 130" |
Many specifications can be modified on request; additional cost may apply. All data is approximate, and data and design are subject to correction or change without prior notice.
Angle & Shape Bending Rolls
Hydraulic, Pyramid Type
STANDARD FEATURES
- Steel Construction Welded Frame
- All Three Rolls are Separately Powered by Hydro-Motors and Planetary Gearboxes
- Rolls are Hardened
- 3-Axis Hydraulic Leg-In Guide Rolls
- Hardened and Ground Roll Shafts Made of High Tensile Special Steel
- Standard Rolls Handle Many Shapes
- Horizontal Working Position
- Two Rolling Speeds
- Electronic Digital Readout (LED)
- Mobile Control Console with Push Button Controls and Digital Readouts
OPTIONAL EQUIPMENT
- Pipe/Tube/Shape Bending Rolls
- Infinitely Variable Rolling Speeds
- Beam-On-Edge Bending Device
- Spiralling Device
- NC Control
- Double-Pinch Model Available HPK 280 DP