Rolls Used | Shape | Capacity |
---|---|---|
ST | Angle Iron, Leg Out |
8" x 8" x 1" ∅158" |
ST* | Angle Iron, Leg In |
8" x 8" x 1" ∅237" |
ST | Flat Bar, Easy Way |
19-11/32" x 4" ∅99" |
ST | Flat Bar, Hard Way |
10" x 4" ∅119" |
ST | Square Bar |
7" ∅99" |
ST | T-Iron, Leg Out |
19-7/16" x 1" ∅119" |
ST | T-Iron, Leg In |
8-5/8" x 7/8" ∅158" |
ST** | Channel, Leg Out |
21-5/8" ∅138" |
ST** | Channel, Leg In |
21-5/8" ∅158" |
SP | Round Bar |
8" ∅197" |
SP | Tube Round |
13-3/4" x 1/4" ∅394" |
ST** | Tube Square |
10-1/4" x 1/2" ∅315" |
ST** | Tube Rectangular |
15-3/4" x 8"x 3/8" ∅394" |
ST | Pipe | 12" Sch. 40 ∅315" |
Shaft Diameter | 11.81" | |
Dia. of Rolls, Upper/Lower | 31.50" | |
Driven Rolls | 3 | |
Rolling Speed, FPM | 6-1/2 & 13 | |
Rolls Adjustment | Hydraulic | |
Working Plane | Horizontal | |
Motor HP | 95 | |
Approx. Weight - lbs. | 84700 | |
Approx Overall Size | 197" x 168" x 148" |
Many specifications can be modified on request; additional cost may apply. All data is approximate, and data and design are subject to correction or change without prior notice.
Angle, Pipe & Shape Bending Rolls
Hydraulic, Double-Pinch Type
STANDARD FEATURES
- All Three Rolls are Powered by Hydro-Motors and Planetary Gearboxes
- Rolls are Hardened
- Rolls Shafts are Special Steel, Hardened And Ground
- Standard Rolls Handle Many Shapes
- 3-Axis Hydraulic Leg-In Guide Rolls
- Two Rolling Speeds
- Two Electronic Digital Readouts (LED)
- Horizontal Working Position
- Mobile Control Console with Push Button Controls and Digital Readouts
OPTIONAL EQUIPMENT
- Pipe/Tube/Shape Bending Rolls
- Beam-On-Edge Bending Device
- NC Control