| Model | Capacity (Mild Steel) |
Rolls Diameter |
Useful Length |
|---|---|---|---|
| MRM-H 650 x 80 |
2' x 10 ga. | 3.15" | 25.59" |
| MRM-H 1050 x 80 |
3' x 12 ga. | 3.15" | 41.34" |
| MRM-H 1270 x 80 |
4' x 14 ga. | 3.15" | 50" |
| MRM-H 1270 x 100 |
4' x 11 ga. | 3.94" | 50" |
| MRM-H 1270 x 130 |
4' x 3/16" | 5.12" | 50" |
| MRM-H 1270 x 150 |
4' x 1/4" | 5.91" | 50" |
| MRM-H 1270 x 180 |
4' x 3/8" | 7.09" | 50" |
| MRM-H 1270 x 200 |
4' x 1/2" | 7.87" | 50" |
| MRM-H 1550 x 80 |
5' x 16 ga. | 3.15" | 61.02" |
| MRM-H 1550 x 100 |
5' x 14 ga. | 3.94" | 61.02" |
| MRM-H 1550 x 130 |
5' x 5/32" (.177") | 5.12" | 61.02" |
| MRM-H 1550 x 150 |
5' x 1/4" | 5.91" | 61.02" |
| MRM-H 1550 x 180 |
5' x 5/16" (.354") | 7.09" | 61.02" |
| MRM-H 1550 x 200 |
5' x 7/16" | 7.87" | 61.02" |
| MRM-H 1550 x 220 |
5' x 1/2" | 8.66" | 61.02" |
| MRM-H 1550 x 250 |
5' x 9/16" | 9.84" | 61.02" |
| MRM-H 2050 x 130 |
6' x 5/32" | 5.12" | 80.71" |
| MRM-H 2050 x 150 |
6' x 1/4" | 5.91" | 80.71" |
| MRM-H 2050 x 180 |
6' x 5/16" | 7.09" | 80.71" |
| MRM-H 2050 x 200 |
6' x 3/8" | 7.87" | 80.71" |
| MRM-H 2050 x 220 |
6' x 7/16" | 8.66" | 80.71" |
| MRM-H 2050 x 250 |
6' x 1/2" | 9.84" | 80.71" |
| MRM-H 2550 x 150 |
8' x 5/32" | 5.91" | 100.39" |
| MRM-H 2550 x 180 |
8' x 1/4" | 7.09" | 100.39" |
| MRM-H 2550 x 200 |
8' x 5/16" | 7.87" | 100.39" |
| MRM-H 2550 x 220 |
8' x 5/16(.354") | 8.66" | 100.39" |
| MRM-H 2550 x 250 |
8' x 3/8" | 9.84" | 100.39" |
| MRM-H 3100 x 180 |
10' x 5/32" | 7.09" | 122.05" |
| MRM-H 3100 x 200 |
10' x 1/4" | 7.87" | 122.05" |
| MRM-H 3100 x 220 |
10' x 5/16" | 8.66" | 122.05" |
| MRM-H 3100 x 250 |
10' x 5/16" (.354") | 9.84" | 122.05" |
Many specifications can be modified on request; additional cost may apply. All data is approximate, and data and design are subject to correction or change without prior notice.
Hydraulic Initial-Pinch Plate Bending Rolls with Power Rear Roll Adjustment
![dot[1]](/wp-content/uploads/2015/09/dot1.png){kind=small}
SEE VIDEO STANDARD FEATURES
- Steel-Welded Main Frame
- Hydraulic Drop End
- Mobile Control Panel
- Motor Powered Centralized Rolls
- Hydraulic Adjustment of Rear Roll and Lower Front Roll
- Main Motor with Brake System
- Planetary Gearbox Driven
- Cone Bending
- Support System for Top Roll
- Rear Roll Journalled in Roller Bearings
- Built According to EC Safety Directives (CE Mark)
- SAE 1050 Certificated Steel Rolls with High Tensile Strength
- Induction Hardened Rolls
- Two Digital Readouts
