Model Capacity
(Mild Steel)
Rolls
Diameter
Useful
Length
MRM-S
1050 x 130
3' x .275" 5.12" 41.34"
MRM-S
1050 x 150
3' x 5/16" 5.91" 41.34"
MRM-S
1050 x 170
3' x .354" 6.69" 41.34"
MRM-S
1050 x 190
3' x 3/8" 7.48" 41.34"
MRM-S
1270 x 130
4' x 1/4" 5.12" 50"
MRM-S
1270 x 150
4' x .295" 5.91" 50"
MRM-S
1270 x 170
4' x .334" 6.69" 50"
MRM-S
1270 x 190
4' x 3/8" 7.48" 50"
MRM-S
1550 x 130
5' x .236" 5.12" 61.02"
MRM-S
1550 x 150
5' x .275" 5.91" 61.02"
MRM-S
1550 x 170
5' x 5/16" 6.69" 61.02"
MRM-S
1550 x 190
5' x .354" 7.48" 61.02"
MRM-S
2050 x 130
6' x 5/32" 5.12" 80.71"
MRM-S
2050 x 150
6' x 3/16" 5.91" 80.71"
MRM-S
2050 x 170
6' x 1/4" 6.69" 80.71"
MRM-S
2050 x 190
6' x .275" 7.48" 80.71"
MRM-S
2050 x 220
6' x .354" 8.66" 80.71"
MRM-S
2550 x 150
8' x 5/32" 5.91" 100.39"
MRM-S
2550 x 180
8' x 3/16" 7.09" 100.39"
MRM-S
2550 x 190
8' x 1/4" 7.48" 100.39"
MRM-S
2550 x 220
8' x .275" 8.66" 100.39"
MRM-S
3050 x 160
10' x 11 ga. 6.30" 122.05"
MRM-S
3050 x 190
10' x 5/32" 7.48" 122.05"
MRM-S
3050 x 200
10' x 3/16" 7.87" 122.05"
MRM-S
3050 x 220
10' x 1/4" 8.66" 122.05"

Many specifications can be modified on request; additional cost may apply. All data is approximate, and data and design are subject to correction or change without prior notice.

Initial-Pinch Plate Bending Rolls with Power Rear Roll Adjustment

STANDARD FEATURES

  • Two Rolls are Powered by a Belt Driven Worm Type Gearbox, Gear and Chain System
  • SAE 1050 Quality Certificated Steel Rolls with High Tensile Strength
  • Steel-Welded Main Frames
  • Power Adjustment of Rear Roll
  • Mobile Foot Control
  • Cone Bending Attachment
  • Central Lubrication
  • Top Roll Support System
  • Precision Bending with Brake Motor
  • Mechanical Manual Open End
  • Extended Roll Shafts for Angle & Shape Bending
  • Built According to EC Safety Directives (CE Mark)

OPTIONAL EQUIPMENT

  • Digital Read-Out for Positions of the Rear Roll
  • Induction Hardened Rolls
  • Angle & Shape Bending Rolls
  • Motorized Bottom Roll